Low Density

  • Higher pressure rating than New Zealand Standard NZS 7601
  • Tough and durable
  • Flexible in cool conditions
  • Thick wall to avoid "kinking"
  • Suitable for K-line Irrigation systems
  • Easy to work with and user friendly
ld

Size

Low Density Dimensions & Pressures

Nominal
Bore
Outside
Diameter
Wall
Thickness
Max Working
Pressure
PSI/KPa
Internal
Diameter
Length
15mm 17.1 2.45 140/ 970 12.2 25m, 50m, 100m, 200m
20mm 25.15 3.3 130/ 900 18.55 25m, 50m, 100m, 200m
25mm 31.5 3.3 115/ 800 24.9 25m, 50m, 100m, 200m
32mm 37.8 3.3 94/ 650 31.2 25m, 50m, 100m, 200m
40mm 44.15 3.3 87/ 600 37.55 25m, 50m, 100m, 200m
50mm 56.85 3.3 72/ 500 50.25 25m, 50m, 100m

  

RX recommends the RX Low Density Fitting  (15mm to 50mm) and RX Compression (15mm to 40mm) range of fittings for use with this pipe. Pipe is available in special lengths on request. All pipe is manufactured to RX Plastics manufactured standard. Pipe cutters are available and can cut up to 50mm pipe

ldsc
RX Low Density Fitting
rxc
RX Compression Fitting
rxpc
Pipe Cutters