K-Line Mid Effluent

Why use K-lineTM Mid Effluent?

    • Low rate of application
    • No leaching or run off
    • No ponding
    • Cost effective
    • Easily shifted
    • Low maintenance
  • Meets all Regional Council Standards
  • Virtually no contamination of pasture

For more information about K-Line™ Mid Effluent, view our brochure.



Senninger 5023 Sprinkler

  • The Senninger 5023 3/4" full-circle spinklers distribute effluent over a 25m diameter
  • Senninger 5023 sprinklers can achieve application rates down to as low as 2mm per hour. This reduces the risk of ponding and run-off and other forms of preferential flow. The soil has time to filter nutrients and bacteria
  • Outlasts and costs less than brass or aluminium sprinklers
  • Buit for strength and durability using high-impact engineering-grade thermoplastics and top quality stainless steel components
  • Pressure range between 1.5 bar and 3 bar
  • Standard lower bearing pipe thread: 3/4" male thread
  • 27o angle for maximum distance of throw
  • Single nozzle design minimizes clogging


  1. Senninger 5023 - 5.95 - 6.75mm nozzles for effluent applications
  2. K-LineTM tapping saddle c/w insert (drill 14mm hole)
  3. 1 x u-bolt, 2 x nuts, 2 x washers
  4. 1 x Senninger adaptor - 1/2"x3/4" male and female specifically for the Senninger sprinkler
  5. K-PipeTM - 32mm, 40mm 45mm. Made specifically for K-LineTMsystems

    Sprinkler Operation


    Sprinkler Operation

    • Senninger 5023 sprinklers have a range of nozzles down to 5.16mm in size that are suitable for effluent. However the recommendation is to use the 6.35mm nozzles
    • Complete flow rates: 1.4 - 3.5m3/hour

    System Components

    • The K-LineTM Mid pods comes complete with the sprinklers, riser assembly and saddle to connect to your K-PipeTM to the pod
    • K-LineTM provides a complete series of K-PipeTM solutions
    • To ease shifting K-LineTM also provides end tow units

    Spacing and Pipe Systems

    • Special 32, 40, 45mm K-PipeTM is availalble to complete your new K-LineTM Mid effluent pods. The K-PipeTM is simply threaded through the K-LineTM pod then with a 14mm drill and 13mm socket you are able to assemble your system. The special K-PipeTM is designed to be flexible but highly resilient to the shifting proccess.