K-Line Max80 Effluent

Why use K-LineTM Max80 Effluent?

  • Low rate of application
  • No leaching or run-off
  • No ponding
  • Cost effective
  • 1 pod to replace a travelling irrigator
  • Large nozzle to eliminate blockages
  • Easily seperated by camlocks and shifted individually
  • Meets all regional council requirements

For more information about K-Line™ Max80 Effluent, view our brochure.

Size

Senninger 8025 S Sprinkler

  • The 80 series full-circle sprinklers distribute effluent over a large diameter, for higher volume systems
  • Senninger sprinklers can achieve application rates down to as low as 2mm per hour. Theis reduces the risk of ponding and run-off and other forms of preferential flow. The soil has time to filter nutrients and bacteria
  • Outlasts and costs less than brasse or aluminium sprinklers
  • Built for strength and durability using high-impact engineering-grade thermoplastics and top quaility stainless steel components
  • Built-in hex wrench for easy in-the-field maintenance standard lower bearing pipe thread: 1 1/4" male thread
  • 25o angle for maximum distance of throw
  • Single nozzle design minimizes clogging

klm80_graphic

  1. RX PP Riser - for 800mm x 50mm thread, both ends
  2. CAM51A - Male
  3. Plassim - 63mm x 25mm with insert top
  4. CAM51D - Female
  5. 3 x u-bolt, 6 x nuts, 6 x washers, 4 x spacers
  6. 2 x Plassim saddle - 63mm saddle
  7. 8025 S Senninger - 9.53- 15.88mm nozzles specifically for effluent applications
  8. 1 x RXHS 32 - 32mm RX hex socket, 1 x RXRB 32x25mm - RX hex reducing bush 32x25mm, 1 x RXPPR25 - 25mm RX poly riser

Sprinkler Operation

  • Special Senninger 8025 sprinklers have a range of nozzles down to 9.53mm in size. However the selection of these are only required when the application rate required is very low
  • Complete flow rates: 5.98-15.83m3/hr

System Components

  • The K-LineTM Max80 pod comes complete with 51mm female and male camlocks
  • K-LineTM provides a 63mm K-PipeTM x 40 meters that is M&F (male and female) camlockes (51mm connectors)
  • With this combination it means that the lines can be connected in any order to the pods
  • To ease shifiting K-LineTM also provides end tow units, 51mm camlocked

Spacing and Pipe System

  • Special 63mm K-PipeTM tubing complete with M&F (male and female camlocks come pre-fabricated so as to be able to instant connection to your new K-LineTM Max80 effluent pods
  • The special K-PipeTM is designed to be flexible but highly resilient to the shifting proces