Skip navigation
RX Plastics Ltd Logo
RX Plastics ltd logo
rx plastics ltd
Home About Us Contact Us
Pipes Valves And Fittings Septic and Effluent Irrigaton Tanks and Troughs Industrial Pots and Tubes

Metric MD Pipe (MDOD)

Medium Density Pipe


x

Metric: Clear identification, 6.3 Bar - 94 psi (SDR21), 8 Bar - 120 psi (SDR17), 9 Bar - 130 psi (SDR15.3), 12 Bar - 174 psi (SDR11), 16Bar - 238 psi (SDR9).
Medium Density metric pipe suitable for Pressure mains and Effluent lines.
Pressure ratings stipulated are recommended Maximum Working pressure @ 20oC
MDOD pipe is suitable for use with Bloat Remedies
Suitable for a wide range of fittings:- camlocks, metric fittings and electrofusion couplings. UV stable.
All RX pipe manufactured in either Ashburton or Hamilton factories dimensionally to AS/NZS 4130.

Coil Sizes: 
MD6.3 Bar: 40mm - 63mm25mts, 50mts, 100mts, 200mts
MD6.3 Bar: 75mm - 90mm25mts, 50mts, 100mts
MD8 Bar: 63mm - 110mm25mts, 50mts, 100mts
MD9 Bar: 20mm - 63mm25mts, 50mts, 100mts, 200mts
MD9 Bar: 75mm - 110mm25mts, 50mts, 100mts
MD12.5 Bar: 20mm - 50mm25mts, 50mts, 100mts, 200mts
MD12.5 Bar: 63mm - 110mm25mts, 50mts, 100mts
MD16 Bar: 20mm - 50mm25mts, 50mts, 100mts, 200mts
MD 16 Bar: 63mm - 110mm25mts, 50mts, 100mts

Straight lengths on application.



RX Metric Fitting
RX Metric Fittings
Suitable for all Metric OD Polyethylene pipe, manufactured to conform to NZS/AS 4129 standard
Recommended maximum working pressure - 1600kpa, 232 psi


FIP Metric Fitting
FIP Metric Fittings
Suitable for all Metric OD Polyethylene pipe, manufactured to conform to NZS/AS 4129 standard
Recommeded maximum working pressure - 1600kpa, 232 psi
2 bolt and 4 bolt tapping saddles
Recommeded maximum working pressure - 1000kpa, 145 psi


x
Plassim Metric Fitting
Suitable for all Metric OD Polyethylene pipe, manufactured to conform to NZS/AS 4129 standard.
Recommend maximum working pressure: 20mm-63mm 16Bar (20oC), 75mm-110mm 10Bar (20oC).
WRC, DGVW, KIWA, Australian Standards mark

 

x
Camlocks
High quality brass arms. Aluminium alloy. Camlocks are sized from 19mm to 152mm.
Special camlocks for 63, 75 & 90mm (AG type) for 8 Bar pressure rated metric pipe.
Standard Camlocks 19, 25, 32, 38, 51, 64, 76, 102 & 152mm.



x
Electrofusion Connections
Electrofusion welding is performed using fittings which contain an integral electrical heating coil. The pipe is cut squarely, cleaned, chamfered and is inserted into a socket, and a current is then applied to the heating coil. The polyethylene at the joint heats, expands and fuses forming a weld upon cooling. Available 20-225mm PE80/100 couplers, tees, elbows, saddles etc.
 

Click here to view MDOD Medium Density Dimensions & Pressures for 6.3, 8 and 9 Bar