E-mail Print

FIP 20-110

This special system guarantees the insertion of pipes inside the fittings with very low manual effort. The clinching ring, the blocking ring and pressure bush and the o-ring are mechanically retained together with the body and keep their location even when the ring nut is loosened or fully unscrewed.

Once the pipe is inserted, the progressive tightening of the ring nut forces the pressure bush to compress the o'ring, ensuring the water tight sealing and adjusting possible problems due to ovalized or underdimensioned pipes. The o'ring functionality and the hydraulic sealing are preserved thanks to a calibrated compression.

When under pressure the clinching ring detaches from the pressure bush in order to reach the correct working position and guarantee the effective mechanical sealing.

  • 20mm to 110mm - 16 Bar - 1600 kpa (230psi)
  • Suitable for all Metric OD polyethylene pipe, manufactured to NZS/AS 4129 standard
  • Made from top quality raw materials (Body, Nut and Blocking Bushes - Polypropylene, O'Ring - Nitrile rubber)
  • UV Stabilised
Enquiry

Size

fpc fpe pft
FPC Straight Coupling
20mm, 25mm, 32mm,
40mm, 50mm, 63mm,
75mm, 90mm, 110mm		 FPE Elbow
20mm, 25mm, 32mm,
40mm, 50mm, 63mm,
75mm, 90mm, 110mm		 FPT Tee
20mm, 25mm, 32mm,
40mm, 50mm, 63mm,
75mm, 90mm, 110mm
fpfc fpmc fprc
FPFC Female Coupling
20mmx1/2", 20mmx3/4",
25mmx3/4", 25mmx1",
32mmx1", 32mmx1 1/4",
40mmx1 1/4", 40mmx1 1/2",
50mmx1 1/2", 50mmx2",
63mmx2", 75mmx2 1/2"
75mmx2", 90mmx3",
110mmx4", 100mmx3"		 FPMC Male Coupling
20mmx1/2", 20mmx3/4"
25mmx3/4", 25mmx1"
32mmx1", 32mmx1 1/2"
40mmx1", 40mmx1 1/2"
50mmx1 1/2",50mmx2"
63mmx2", 75mmx2 1/2"
75mmx3", 90mmx3"
110mmx2", 110mmx4"		 FPRC Reducing Coupling
25x20mm, 32x25mm,
40x32mm, 50x32mm,
50x40mm, 63x50mm,
75x63mm, 90x75mm,
110x90mm
fpfe fpft fpme
FPFE Female Elbow
20mmx1/2", 20mmx3/4",
25mmx3/4", 25mmx1"
32mmx1", 32mmx3/4",
40mmx1 1/4", 50mmx1 1/2",
50mmx2", 63mm x 2",
75mmx2 1/2", 75mmx2",
75mmx3" , 90mmx3"		 FPFT Female Tee
20mmx1/2",25mmx3/4",
32mmx1", 40mmx1 1/4",
50mmx1 1/2, 63mmx2",
75mmx2 1/2", 90mmx3"
100mmx4"		 FPME Male Elbow
20mmx1/2", 25mmx3/4",
32mmx1", 40mmx1 1/4",
40mmx1 1/2", 50mmx1 1/2",
63mmx2"
fprt
FPRT Reducing Tee
20x25mm, 32x25mm,
40x32mm, 50x40mm,
63x50mm


Product Range - Tapping Saddles

  • 20mm to 110mm - 10 Bar - 1000 kpa (145psi)
  • Suitable for all Metric OD polyethylene pipe, manufactured to NZS/AS 4129 standard
  • Made from top quality raw materials (Body, - Polypropylene, O'Ring - Nitrile rubber, Nuts & bolts - Stainless steel)
  • UV Stabilised
wfpts_2 wfpts_4
FPTS - Two Bolt Tapping Saddle
25mmx3/4", 32mmx3/4", 32mmx1"
40mmx1/2", 40mmx3/4", 40mmx1"
50mmx3/4", 50mmx1"		 FPTS-4 Four Bolt Tapping Saddle
63mmx3/4", 63mmx1", 63mmx1 1/2"
75mmx3/4", 75mmx1",75mmx1 1/2"
75mmx2", 90mmx3/4", 90mmx1"
90mmx1 1/2", 90mmx2", 110mmx1"